Filter
Top Products
9 Detection Management Software DMS
DMS Start Page
Models SE and DL
Detection Management Software DMS
3M™ Detection Management Software DMS is used to record, report, chart and analyze data
collected for assessment of select occupational health hazards in the workplace. Designed for
dosimetry, sound level measurements, heat stress assessments and environmental
monitoring, the software helps safety and occupational professionals:
• Retrieve, download, share and save instrument data
• Generate insightful charts and reports
• Export and share recorded data
• Perform “What If” analysis and recalculate data based on selected time intervals
• Set up instruments and check for firmware updates
Some data can only be displayed in DMS. One example is logging data obtained when
logging is enabled in an instrument equipped with that option (“Logging” on page 33). Another
example is with the GPS function. When enabled the data is viewable in DMS.
DMS Start Page
Navigational
buttons
(1) Setup
(2) Download
(3) Data Finder (look
at your session
data or use Quick
Report feature)