Filter
Top Products
16 Providing power
Checking or changing type
Models SE and DL
Battery Check screen
1. Turn on the SoundPro SE/DL by pressing On/Off/ESC . You will be at
the start screen.
• If turned on, ensure you are at the start screen by pressing On/Off/Esc
repeatedly until the start screen appears.
Figure 2-6: Selecting Setup in the Start Screen
2. Press Up/Down arrows to highlight Setup and then press Enter .
3. In the Setup screen, select Battery, then press Enter . The Battery
Check screen appears.
Figure 2-7: Selecting battery type in battery check screen
4. Press the softkey that corresponds with the installed battery type (See “A” or
“B” in Figure 2-7 for selection). The label above the softkey is underlined to
indicate the current selection.
5. When completed, press On/Off/Esc once to return to the Setup
screen
and twice to return to the start screen.
Setup
Softkey buttons
A: Press softkey
to select Alkaline
B : Press softkey
to select NiMH