Filter
Top Products
Appendix A
135
Models SE and DL
Port pinouts
AC/DC jack
The pinout for the jack used for the AC/DC signals is displayed below in
Figure A-1. This 3.5 millimeter jack is the same type of jack commonly used
for stereo outputs in music systems.
Figure A-1: Pinout for the AC/DC output jack
Auxiliary connector
The auxiliary connector in the base of the instrument can be used for input
and output triggers (See “Triggers”) to receive GPS signals or for RS-232
serial communications. Figure A-2 shows the pinout for the auxiliary
connector.
Figure A-2: Auxiliary connector