Filter
Top Products
18 Turning on
Start screen and the keypad
Models SE and DL
Turning on
1. To turn on the SoundPro, press the On/Off/Esc key until the start
screen appears.
Start screen and the keypad
The Start screen is the first screen you see when you power on and the last
screen you see when you shut down. This essential main screen is also used
to navigate through the menu options.
The keypad and softkeys are used to setup the instrument, run a study, stop
a study, view your measurement values, and power on and off the meter.
Figure 2-10: SoundPro SE/DL start screen and keypad
1. Display
8. Softkeys
12. ON/Off and ESC
2. Backlight
9. AltF
6. Run/Pause
Indicators
• Battery power:
• Stop:
• Run time:
00:00:00
<SLM> CAL FILE COMM
5. Up/Down arrows
7. “Softkey” Menu:
Correspond with softkeys
3. Stop
11. Right arrow
4. Left
10. Enter