Filter
Top Products
43 Setting up auto-run
Timed run setting
Models SE and DL
Timed run setting
In Timed Run mode, you program the instrument’s duration (or timed run)
and then manually start your study, which can be applied as many times as
you wish. The auto-run will end when the duration expires.
Viewing or changing the Timed Run setup
1. From the start screen, press Up/Down to highlight Setup and
press Enter .
2. Select Auto-Run by using Up/Down to highlight and press
Enter to select.
3. In the Auto-Run screen, repeatedly press Enter until Timed-Run
appears.
4. To set the duration, press Enter to toggle between the Hours,
Minutes, and Seconds field. To change the time values, press
Up/Down repeatedly until the specified value is selected.
5. Press On/Off/Esc repeatedly to return to the start screen. When you
are ready to run your study, press Run/Pause .
Figure 4-6: Timed Run setup screen
Duration
Formatted as
Hours:Minutes:Seconds
Timed-Run
Auto-run setting with timed
run selected