Filter
Top Products
125
Installing & Setup the USB Driver
In order to use the GS-10 USB, you must first install the USB driver.
The USB Driver is included in the “GS-10 SOFTWARE CD-ROM.”
■ What is USB Driver?
The USB Driver is software which passes data between the GS-10 and the application (sequencer software
etc.) that is running on the USB-connected computer.
The GS-10 Driver sends data from the application to the GS-10, and passes data from the GS-10 to the
application.
The GS-10 can receive and transmit both digital audio signals and MIDI messages.
The explanation about installing and setup the driver is organized according to the computer and driver
mode that you are using. Please proceed to the following pages.
Installing & Setting Up the Driver (Windows) ............................. (p. 126)
Installing & Setting Up the Driver (Macintosh) ........................... (p. 146)
Application
USB
Driver
Computer GS-10
USB cable
USB connector