Filter
Top Products
62
Chapter 6 Setting the External Pedal Functions
* Although you can set this so that the same target is controlled
by more than one controller, in such cases, make sure not to
have different sources changing the parameter at the same
time. Changing the parameter simultaneously using different
sources may result in noise being generated.
Target Range
fig.06-050d
The value of the parameter selected as the target changes
within the range defined by “Min” and “Max,” as set on the
GS-10.
When using an external foot switch, or other controller that
acts as an on/off switch, “Min” is selected with Off
(CLOSED), and “Max” is selected with On (OPEN).
When using an external expression pedal or other controller
that generates a consecutive change in the value, the value of
the setting changes accordingly, within the range set by the
minimum and maximum values.
Also, when the target is of an on/off type, the median value
of the received data is used as the dividing line in
determining whether to switch it on or off.
When using the foot switch:
fig.06-060
When using the expression pedal:
fig.06-070
When controlling the On/Off target with the
expression pedal:
fig.06-080
* The range that can be selected changes according to the target
setting.
* When the “minimum” is set to a higher value than the
“maximum,” the change in the parameter is reversed.
* The values of settings can change if the target is changed after
the “minimum” and “maximum” settings have been made. If
you’ve changed the target, be sure to recheck the “minimum”
and “maximum” settings.
Amount of change in
parameter value
maximum value
Target Max
minimum value
Target Min
On
Depress
Foot Switch
Off
Release
maximum value
Target Max
minimum value
Target Min
When the pedal
is fully advanced
When the pedal
is fully raised
Expression Pedal
Off
On
Target Max
Off
Target Min
When the pedal
is fully advanced
When the pedal
is fully raised
When the pedal
is advanced halfway
Expression Pedal
On