Filter
Top Products
47
Chapter 4 Introduction to Effects and Parameters
Section 4
Depth
This adjusts the depth of the vibrato.
Trigger
This selects on/off of the vibrato.
* It is assumed that this parameter will be assigned (p. 60) to the
foot switch.
Rise Time
This sets the time passing from the moment the trigger is
turned on until the set vibrato is obtained.
UV (Uni-V)
Although this resembles a phaser effect, it also provides a
unique undulation that you can’t get with a regular phaser.
Parameter Value
Rate 0–100, BPM –BPM
Depth 0–100
Level 0–100
Rate
Adjusts the rate of the Uni-V effect.
* When set to BPM, the value of each parameter will be set
according to the value of the Master BPM (p. 54) specified for
each patch. This makes it easier to achieve effect sound settings
that match the tempo of the song (synchronizing the cycle to
one-half or one-fourth of the BPM when the set cycle rate is
increased).
When setting to BPM, press PARAMETER [ ] to display
the Master BPM settings screen.
Depth
Adjusts the depth of the Uni-V effect.
Level
Adjusts the volume.
RT (Rotary)
This produces an effect like the sound of a rotary speaker.
Parameter Value
Speed Sel Slow, Fast
Rate (Slow) 0–100, BPM –BPM
Rate (Fast) 0–100, BPM –BPM
Rise Time 0–100
Fall Time 0–100
Depth 0–100
Speed Sel (Speed Select)
This parameter changes the simulated speaker’s rotating
speed (Slow or Fast).
Rate (Slow)
This parameter adjusts the speed of rotation when set to
“Slow.”
Rate (Fast)
This parameter adjusts the speed of rotation when set to
“Fast.”
* When the Rate (Slow) or Rate (Fast) set to BPM, the value of
each parameter will be set according to the value of the Master
BPM (p. 54) specified for each patch. This makes it easier to
achieve effect sound settings that match the tempo of the song
(synchronizing the cycle to one-half or one-fourth of the BPM
when the set cycle rate is increased).
When setting to BPM, press PARAMETER [ ] to display
the Master BPM settings screen.
Rise Time
This parameter adjusts the time it takes for the rotation speed
to change when switched from “Slow” to “Fast.”
Fall Time
This parameter adjusts the time it takes for the rotation speed
to change when switched from “Fast” to “Slow.”
Depth
This parameter adjusts the amount of depth in the rotary
effect.