Filter
Top Products
55
Section 5
Chapter 5 Creating Original Effects Types (Customize)
With the GS-10’s Customize function, you can rely on your
own sensibilities and create a totally new effect by tweaking
the settings for the “Preamp/Speaker Simulator,”
“Overdrive/Distortion,” and “Pedal Wah.” The result can
then be saved on the GS-10 as “Custom” settings.
You can also use these custom settings in other patches.
Customizing the COSM Amps
You can make three different sets of settings, Custom 1,
Custom 2, and Custom 3.
* The sound of any patch that uses Custom 1, 2, or 3 will be
altered if the custom settings are edited.
1. Press the PREAMP/SPEAKER On/Off switch to display
the PREAMP/SPEAKER effect screen.
2. Press PARAMETER [ ] [ ] to call up the Type
parameter.
3. Rotate the PATCH/VALUE dial to call up “Custom 1,”
“Custom 2,” or “Custom 3.”
fig.05-010d
4. Press PARAMETER [ ] [ ] to show the custom
parameters.
fig.05-020d
5. Rotate the PATCH/VALUE dial to change the setting’s
value.
6. Repeat Steps 4 and 5 as needed.
7. Press [EXIT] to return to the Play screen.
Parameter Value
Type JC Clean, TW Clean, Crunch,
VO Lead, BG Lead,
MS1959 Stk, Modern Stk
Bottom -50–+50
Edge -50–+50
Bass Freq -50–+50
Treble Freq -50–+50
Preamp Low -50–+50
Preamp High -50–+50
Type
Selects the basic type of preamp.
Bottom
Adjusts the amount of distortion in the low frequencies.
Edge
Adjusts the amount of distortion in the high frequencies.
Bass Freq (Bass Frequency)
Adjusts the frequency affected by the BASS knob.
Treble Freq (Treble Frequency)
Adjusts the frequency affected by the TREBLE knob.
Preamp Low
Adjusts the preamp section’s low-frequency tone.
Preamp High
Adjusts the preamp section’s high-frequency tone.
The trademarks listed in this document are trademarks
of their respective owners, which are separate companies
from BOSS. Those companies are not affiliated with
BOSS and have not licensed or authorized BOSS’s GS-10.
Their marks are used solely to identify the equipment
whose sound is simulated by BOSS’s GS-10.
JC Clean This is the sound of the Roland JC-120.
TW Clean This models a Fender Twin Reverb.
Crunch
This is a crunch sound that can produce
natural distortion.
VO Lead
This models the drive sound of a
VOX AC-30TB.
BG Lead
This models the lead sound of the
MESA/Boogie combo amp.
MS1959 Stk
This models the sound input to Input I on a
Marshall 1959.
Modern Stk
This models the rhythm channel of a
MESA/Boogie Dual Rectifier.