Filter
Top Products
67
Chapter 7 Convenient Functions and System Settings
Section 7
Checking the Effect Output
Level with the Level Meter
You can meter the output level of each effect. This is handy
for checking the effects’ output levels.
fig.07-130
1. Press [METER].
fig.07-140d
2. Rotate the PATCH/VALUE dial to select the effect
whose level you want to check.
* Effects are shown in lowercase letters when turned off.
* You can check the level of signals being input to the INPUT
jack by selecting “Input.” Selecting “Output” allows you to
check the level of signals output from the GS-10.
* You may not be able to achieve the effects you envision if your
output levels are set too high. Adjust the output level of each of
your effects to the optimum value while checking the meter
and making sure the needle doesn’t swing too far to the right.
3. Press [EXIT] to return to the Play screen.
13
2