Filter
Top Products
41
Chapter 4 Introduction to Effects and Parameters
Section 4
Rise Time
This determines the time needed for the volume of the
feedback sound to reach its maximum from the moment the
effect is turned on.
Rise Time (▲)
This determines the time needed for the volume of the one
octave higher feedback sound to reach its maximum from the
moment the effect is turned on.
F.B.Level (Feedback Level)
Adjusts the volume of the feedback sound.
F.B.Level (▲)
This adjusts the volume of the one octave higher feedback
sound.
Vib Rate (Vibrato Rate)
This adjusts the rate of the vibrato when the feedbacker is on.
* When set to BPM, the value of each parameter will be set
according to the value of the Master BPM (p. 54) specified for
each patch. This makes it easier to achieve effect sound settings
that match the tempo of the song (synchronizing the cycle to
one-half or one-fourth of the BPM when the set cycle rate is
increased).
When setting to BPM, press PARAMETER [ ] to display
the Master BPM settings screen.
Vib Depth (Vibrato Depth)
This adjusts the depth of the vibrato when the feedbacker is
on.
FX-2
With FX-2, you can select the effect to be used from the
following.
• PHASER
• FLANGER
• HARMONIST
• PITCH SHIFT (Pitch Shifter)
• OCTAVE
• PEDAL BEND
• 2x2 CHORUS
• PAN
• VIBRATO
• UNI-V
• ROTARY
• SHORT DELAY
• HUMANIZER
• SLICER
• AUTO RIFF
• GUITAR SYNTH
• BASS SIM. (Bass Simulator)
• STEREO EQ (Stereo Equalizer)
Parameter Value
On/Off Off, On
FX Select PH, FL, HR, PS, OC, PB, 2CE,
PAN, VB, UV, RT, SDD, HU, SL,
AR, SYN, BS, SEQ
On/Off (Effect On/Off)
Switches the FX-2 effect on/off.
FX Select (Effect select)
This selects the effect to be used.