Filter
Top Products
18
Chapter 2 Creating Your Own Favorite Tones (Patches)
What is a Patch?
The GS-10 can store 200 combinations (or “sets”) of effects
and parameter settings. Each of these sets is called a “patch.”
Patches include both User patches and Preset patches.
fig.02-010
User Patches (U001–U100)
Newly created effects settings are saved in the User patches.
*A “U” appears in the display when a User patch is being used.
fig.02-020d
Preset Patches (P101–P200)
The Preset patches contain effect settings that really help
bring out the special characteristics of the GS-10.
Although you cannot overwrite the Preset patches with your
own settings, you can change (edit) a Preset patch’s settings,
then save the result as a User patch. (p. 25)
*A “p” appears in the display when a Preset patch is being
used.
fig.02-030d
How to Select Patches
(Patch Change)
When the Play screen is showing in the display, you can
switch patches using the PATCH/VALUE dial or DIRECT
PATCH [1]–[4] (p. 27).
fig.02-040
* If you want to set a limit to the number of patches that can be
selected with the PATCH/VALUE dial, change the system
function settings (p. 65).
* Settings currently being edited are cleared when you switch
patches. If you want to save the setting changes you’ve made,
use the Write procedure (p. 25).
About the Display Indication
The following information appears in the Play screen.
fig.02-050d
If the Patch Does Not Switch
On the GS-10, you cannot switch patches in any screen other
than the Play screen. Press [EXIT] to return to the Play screen
(p. 15).
U100
● Patch Name
● Input Select
● Effects
● Assign 1–8
● Master
● Noise Suppressor
● Effect Chain
U003
U002
U001
● Patch Name
● Input Select
● Effects
● Assign 1–8
● Master
● Noise Suppressor
● Effect Chain
User Patches
P200
● Patch Name
● Input Select
● Effects
● Assign 1–8
● Master
● Noise Suppressor
● Effect Chain
P103
P102
P101
● Patch Name
● Input Select
● Effects
● Assign 1–8
● Master
● Noise Suppressor
● Effect Chain
Preset Patches
User/Preset Number
Patch Name