Filter
Top Products
6
UTILITY PACKAGE (GX Configurator-CT)
6.4 Initial Setting
6 - 14
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
PROCEDURES AND
SETTINGS BEFORE
OPERATION
5
FUNCTIONS
6
UTILITY PACKAGE (GX
Configurator-CT)
7
PROGRAMMING
8
TROUBLESHOOTING
6.4 Initial Setting
[Purpose]
Make [Initial setting] for each channel to operate the QD64D2.
For parameter types of [Initial setting], refer to Section 6.1.
This setting allows skipping sequence program setting.
By making the initial settings, the sequence program settings become unnecessary.
[Operating procedure]
"Start I/O No.*" "Module type" "Module model name"
* Enter the [Start I/O No.] in hexadecimal.
[Setting screen]
Figure 6.6 [Initial setting] screen
Channel 1
..................
Channel 2