Filter
Top Products
A - 3
[WIRING PRECAUTIONS]
[STARTUP/MAINTENANCE PRECAUTIONS]
[DISPOSAL PRECAUTIONS]
CAUTION
Always ground the shielded cable on the module side.
Failure to do may cause a malfunction.
Correctly wire cables to the module after checking the rated voltage and terminal layout of the
product.
Connecting a voltage different from the rated voltage or incorrect wiring may result in a fire or failure.
CAUTION
Do not disassemble or remodel each of the modules.
Doing so may cause failure, malfunctions, personal injuries and/or a fire.
Be sure to shut off all phases of the external power supply used by the system before mounting or
removing the module.
Not doing so may result in a failure or malfunction of the module.
Do not mount/remove the module onto/from the base unit more than 50 times (IEC 61131-2
compliant), after the first use of the product.
Doing so may cause malfunctions.
Do not touch the terminal while the power is ON. Failure to do may cause a malfunction.
Be sure to shut off all phases of the external power supply used by the system when cleaning the
module or retightening the terminal or module fixing screws.
Not doing so may result in a failure or malfunction of the module.
If the screw is too loose, it may cause a drop, short circuit or malfunction.
Excessive tightening may damage the screw and/or the module, resulting in a drop, short circuit or
malfunction.
Before handling the module, touch a grounded metal object to discharge the static electricity from
the human body.
Not doing so may result in a failure or malfunction of the module.
CAUTION
When disposing of this product, treat it as industrial waste.