Filter
Top Products
7 - 9
7.3 Programming Example when GX Configurator-CT is Used
7
PROGRAMMING
* 1 Set this only when using the latch counter function.
* 2 Set this only when using the linear counter function.
(c) Writing the intelligent function module parameters
Write the intelligent function module parameters to the CPU module.
This operation is performed using the parameter setting module selection screen.
For writing of intelligent function module parameters with GX Configurator-CT,
refer to Section 6.3.3.
Table 7.4 Auto refresh setting
Description Setting value
CH1 Present value D0
CH1 Latch count value
*1
D2
CH1 Overflow detection flag
*2
D4
CH2 Present value D8
CH1 Error code D118
CH1 Warning code D119
CH2 Error code D120
CH2 Warning code D121