Yamaha M7CL-48 Music Mixer User Manual


 
Inserting an external device into a channel
M7CL Owner’s Manual
Input/output patching
9
111
D INSERT ON/OFF button
This button switches the insert on/off. If this button is
off, the insert-out/in signal path is bypassed.
E INSERT IN popup button
This indicates the input port that is selected as the
insert-in for this channel. Press this button to open a
popup window where you can select the input port.
4
Access either the one-channel or the eight-
channel INSERT/DIRECT OUT popup win-
dow, and press the INSERT OUT popup but-
ton.
The OUTPUT PORT SELECT popup window will
appear, allowing you to select the output port used for
insert-out. The window includes the following items.
1 Output port select tabs
These tabs select the output ports shown in the win-
dow. Each tab corresponds to the following output
ports.
OMNI (M7CL-48ES only)
...........OMNI OUT jacks 1–8 will be dis-
played.
SLOT 1–SLOT 3
...........Output channels 1–16 from slots 1–
3 will be displayed.
•RACK ...........Input ports to rack 1–8 will be dis-
played.
B Output port select buttons
These buttons assign the output port that will be used
as insert-out for the currently selected channel.
5
Use the output port select tabs and the out-
put port select buttons to specify the out-
put port that will be used as insert-out, and
press the CLOSE button.
You will return to the INSERT/DIRECT OUT popup
window.
6
Press the INSERT IN popup button.
The INPUT PORT SELECT popup window will
appear, allowing you to select the input port used for
insert-in. Each tab corresponds to the following input
ports.
OMNI (M7CL-48ES only)
........... OMNI IN jacks 1–8 will be displayed.
SLOT 1–SLOT 3
........... Input channels 1–16 of slots 1–3 will
be displayed.
•RACK ........... Output ports to rack 1–8 will be dis-
played.
7
Specify the input port you will use for
insert-in, and press the CLOSE button.
8
Press the INSERT ON/OFF button to turn it
ON.
In this state, insert-out/in is enabled. Adjust the input/
output levels of your external device as necessary.
9
If you want to change the insert-out/in posi-
tion, access the one-channel INSERT/
DIRECT OUT popup button, and press one
of the three INSERT fields.
The INSERT field you pressed will be enabled.
10
When you have finished making all set-
tings, click the “× symbol located in the
upper right to close the window.
You will return to the OVERVIEW screen.
11
As desired, make insert settings for other
channels as well.
1
2
If a rack in which a GEQ is mounted is specified as the insert-
out or insert-in, the other patch point will automatically be
assigned to the same rack. Also, insert mode will automati-
cally be switched on. Additionally, if you defeat the insert-out
or insert-in of a rack in which a GEQ is mounted, the other
patch point will automatically be defeated and at the same
time insert mode will automatically be switched off.
NOTE
If you have selected the OMNI IN jack on the M7CL-48ES as
the input port for insert-in, make the HA settings in the
INSERT IN HA field.
•Even if the INSERT ON/OFF button is OFF, the signal
selected for insert-out will continue to be sent.
HINT