Filter
Top Products
M7CL Owner’s Manual
Operations in the SELECTED CHANNEL section
96
● Turning a channel on/off
Use the FADER field to switch the channel on/off in the
SELECTED CHANNEL VIEW screen. This field
includes the following items.
1 FADER
This indicates the input/output level of the channel.
This is linked with the fader on the top panel.
B Σ CLIP indicator
This indicator will light if an overload occurs at even
one of the level detection points in that channel.
C Input/output level
This indicates the current setting of fader.
D CH ON/OFF button
This button switches the channel on/off. This is linked
with the [ON] button of the top panel.
When you press the CH ON/OFF button in the FADER
field, that channel will be switched on/off and the top
panel [ON] key will operate in tandem with this.
● Assigning a channel to a DCA group
(input channels only)
Use the DCA field of the SELECTED CHANNEL VIEW
screen to assign a channel to a DCA group. This field
includes the following items.
1 DCA popup button
This accesses the DCA/MUTE GROUP ASSIGN
MODE popup window, where you can select the chan-
nels that will be assigned to each DCA group or mute
group.
B DCA buttons 1–8
These buttons select the DCA group(s) to which this
channel is assigned.
To assign the channel to a DCA group, turn on the desired
DCA button 1–8 (multiple selections are allowed). To
check the channels that are assigned to each DCA group,
press the DCA popup button to open the DCA/MUTE
GROUP ASSIGN MODE popup window. (For details on
the popup window → p. 124).
● Assigning a channel to a mute group
Use the MUTE field of the SELECTED CHANNEL
VIEW screen to assign a channel to a mute group. This
field includes the following items.
1 MUTE popup button
This accesses the DCA/MUTE GROUP ASSIGN
MODE popup window, where you can select the chan-
nels that will be assigned to each DCA group or mute
group.
B MUTE SAFE indicator
This will light if this channel is set to Mute Safe.
You can make Mute Safe settings in the DCA/MUTE
GROUP ASSIGN MODE popup window.
C MUTE buttons 1–8
These buttons select the mute group(s) to which this
channel is assigned.
To assign the channel to a mute group, turn on the desired
mute button 1–8 (multiple selections are allowed). To
check the channels that are assigned to each mute group,
press the MUTE popup button to open the DCA/MUTE
GROUP ASSIGN MODE popup window. (For details on
the popup window → p. 124).
3
2
4
1
2
1
3
1
2