MIDI Data Format
M7CL Owner’s Manual
285
Appendices
4.2.2 Function Name
4.2.3 Module Name
4.3 Function call – library edit –
4.3.1 Format (Parameter change)
Receive
Data will be received when [Parameter change Rx] is on and the Device number
of both [Rx CH] and SUB STATUS are matched. The data will be echoed when
[Parameter change ECHO] is on. The corresponding memory/library will be
changed immediately the data is received.
Transmission
Parameter Change Message will be sent in reply to Request. If [Parameter change
ECHO] is on, the message will be sent as it is.
4.3.2 Function Name
4.3.3 Module Name
FUNCTION NAME
Store “LibStr__”
Recall “LibRcl__”
Unknown Factor Store “LibUnStr”
Unknown Factor Recall “LibUnRcl”
Store Undo (only Scene) “LibStrUd”
Recall Undo (only Scene) “LibRclUd”
MODULE NAME
Scene “SCENE___”
Input CH “INCHNNL_”
Output CH “OUTCHNNL”
Input EQ “INEQ____”
Output EQ “OUTEQ___”
Dynamics “DYNA____”
GEQ “GEQ_____”
Effect “EFFECT__”
Function Number channel*1) tx/rx
“LibStr__“ SCENE 1- 300 *5)
tx/rx
INPUT CH LIB 1-199 *1)
tx/rx
OUTPUT CH LIB 1-199 *2) *3) *4)
tx/rx
INPUT EQ LIB 41- 199 *1)
tx/rx
OUTPUT EQ LIB 4- 199 *2) *3) *4)
tx/rx
Dynamics LIB 42- 199 *1) *2) *3) *4) *8)
tx/rx
GEQ LIB 1- 199 *6)
tx/rx
EFFECT LIB 58- 199 *7)
tx/rx
“LibUnStr“ SCENE 1- 300 0
tx
INPUT CH LIB 1-199 0
tx
OUTPUT CH LIB 1-199 0
tx
INPUT EQ LIB 41- 199 0
tx
OUTPUT EQ LIB 4- 199 0
tx
Dynamics LIB 42- 199 0
tx
GEQ LIB 1- 199 0
tx
EFFECT LIB 58- 199 0
tx
“LibRcl__“ SCENE 0- 300 *5)
tx/rx
INPUT CH LIB 0-199 *1)
tx/rx
OUTPUT CH LIB 0-199 *2) *3) *4)
tx/rx
INPUT EQ LIB 1- 199 *1)
tx/rx
OUTPUT EQ LIB 1- 199 *2) *3) *4)
tx/rx
Dynamics LIB 1- 199 *1) *2) *3) *4) *8)
tx/rx
GEQ LIB 0- 199 *6)
tx/rx
EFFECT LIB 1- 199 *7)
tx/rx
“LibUnRcl“ SCENE 0 *5)
tx
INPUT CH LIB 0 *1)
tx
OUTPUT CH LIB 0 *2) *3) *4)
tx
INPUT EQ LIB 0 *1)
tx
OUTPUT EQ LIB 0 *2) *3) *4)
tx
Dynamics LIB 0 *1) *2) *3) *4) *8)
tx
GEQ LIB 0 *6)
tx
EFFECT LIB 0 *7)
tx
“LibStrUd“ SCENE 0 0
“LibRclUd“ SCENE 0 0
*1) 0:CH1–47:CH48
48:ST IN 1L–55:ST IN 4R
*2) 256:MIX1–271:MIX16
*3) 512:MATRIX1–519:MATRIX8
*4) 1024:STEREO L–1026:MONO(C)
*5) 512:will be used if the recalling or storing data is only one.
*6) 0:RACK1–7:RACK8 If a GEQ is mounted in RACK 1–8.
*7) 0:RACK5–3:RACK8 If an effect is mounted in RACK 5–8.
*8) 1280:CH 1–1327:CH 48
1328:STIN 1L–1335:STIN 4R
(Dynamics2)
STATUS 11110000 F0
System exclusive message
ID No. 01000011 43
Manufacture’s ID number (YAMAHA)
SUB STATUS 0001nnnn 1n
n=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3E
Digital mixer
MODEL ID 00010001 11
M7CL
DATA
CATEGORY
00000000 00
OTHER DATA
FUNCTION
NAME
01001100 "L"
(ASCII CODE)
01101001 "i"
(ASCII CODE)
01100010 "b"
(ASCII CODE)
0fffffff ff
(ASCII CODE)
0fffffff ff
(ASCII CODE)
0fffffff ff
(ASCII CODE)
0fffffff ff
(ASCII CODE)
0fffffff ff
(ASCII CODE)
MODULE NAME 0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
DATA 0mmmmmmm mh
number -source start High
0mmmmmmm ml
number -source start Low
0mmmmmmm mh
number -source end High
0mmmmmmm ml
number -source end Low
0mmmmmmm mh
number -destination start High
0mmmmmmm ml
number -destination to start Low
EOX 11110111 F7
End of exclusive
FUNCTION NAME
Copy ”LibCpy__”
Paste ”LibPst__”
Clear ”LibClr__”
Cut ”LibCut__”
Insert ”LibIns__”
Edit Undo ”LibEdtUd”
MODULE NAME
SCENE LIB “SCENE___“
INPUT CH LIB “INCHNNL_“
OUTPUT CH LIB “OUTCHNNL“
INPUT EQ LIB “INEQ____“
OUTPUT EQ LIB “OUTEQ___“
Dynamics LIB “DYNA____“
GEQ LIB “GEQ_____“
EFFECT LIB “EFFECT__“