Filter
Top Products
Using EQ
M7CL Owner’s Manual
EQ and Dynamics
10
117
[EQ popup window (ALL)]
This window displays all input channels (or output
channels) at once. This page is only for display, and
does not allow the parameters to be edited. It is useful
when you need to quickly check the EQ settings for all
channels, or when you want to copy/paste EQ settings
between distant channels.
1
Channel select button
This indicates the channel number, the icon selected
for that channel, and the channel name. Press these
buttons to select the channel you want to copy or
paste, or to select multiple channels.
B
EQ graph
This mini-graph shows the approximate response of
the EQ parameters. You can press the EQ graph to
switch to the one-channel window with that channel
selected. If the EQ or high-pass filter is on, the
response curve is highlighted.
3
Access the ATT/HPF/EQ popup window (1
ch), and press the EQ ON button to enable
the EQ.
If the ATT/HPF/EQ popup window is displayed, you
will be able to edit all of the EQ parameters.
4
If you want to use the high-pass filter on an
input channel, operate the HPF knob or
HPF ON/OFF button in the ATT/HPF/EQ
popup window.
Input channels provide a high-pass filter that is inde-
pendent of the four-band EQ. The HPF ON/OFF but-
ton switches the high-pass filter on/off, and the HPF
knob adjusts the cutoff frequency.
5
If you want to copy EQ settings to another
channel, or initialize the EQ settings, use
the tool buttons of the ATT/HPF/EQ popup
window.
For details on how to use these buttons, refer to “Using
the tool buttons” (
→
p. 35).
1
2
• Output channels do not have a high-pass filter that is inde-
pendent of the EQ. However, you can turn on the high-pass
button in the popup window to use the LOW band EQ as a
high-pass filter.
•For both input channels and output channels, you can turn on
the low-pass filter button to use the HIGH band EQ as a low-
pass filter.
HINT
• EQ settings can be saved/loaded at any time using the dedi-
cated library (
→
p. 35). Presets suitable for a variety of instru-
ments or situations are also provided.
•You can also access the SELECTED CHANNEL VIEW
screen, and use the encoders of the SELECTED CHANNEL
section to edit the EQ and high-pass filter (
→
p. 91).
•Even when the ATT/HPF/EQ popup window is displayed, you
can use the encoders of the SELECTED CHANNEL section
to control the EQ.
HINT