Yamaha M7CL-48 Music Mixer User Manual


 
Top panel
Panels and controls
23
M7CL Owner’s Manual
2
In this section you can control the principal parameters of
the STEREO/MONO channels.
1 [SEL] key
This key selects the channel to be controlled. When you
press this key to make the LED light, that channel will be
selected for control in the SELECTED CHANNEL sec-
tion and in the touch screen.
For the STEREO channel, the selected object of control
will alternate between the L and R channels each time you
press the [SEL] key.
B [CUE] key
This key selects the channel to be cue-monitored. If cue is
on, the LED will light.
C [ON] key
This key switches the channel on/off. If a channel is on,
the key LED will light. If the FADER ASSIGN MODE for
MONITOR FADER is set to MONO or STEREO, this key
switches the monitor output on or off.
D Fader
This adjusts the output level of the channel. If the FADER
ASSIGN MODE for MONITOR FADER is set to MONO
or STEREO, this fader adjusts the monitor output level.
In this section you can select the channels that will be con-
trolled by the Centralogic section and in the touch screen.
1 [IN 1-8] key
B [IN 9-16] key
C [IN 17-24] key
D [IN 25-32] key
These keys select INPUT channels 1–8, 9–16, 17–24, and
25–32 respectively.
E [ST IN] key
This key selects ST IN channels 1–4.
F [DCA] key
This key selects the DCA groups.
G [MIX 1-8] key
H [MIX 9-16] key
These keys select MIX channels 1–8 and 9–16 respec-
tively.
I [MATRIX] key
This key selects MATRIX channels 1–8.
J [STEREO] key
This key assigns the STEREO channel L/R and the
MONO channel to modules 1–3 of the Centralogic sec-
tion. In this case, modules 4–8 are not used.
K [IN 33-40] key (M7CL-48/48ES only)
L [IN 41-48] key (M7CL-48/48ES only)
These keys select INPUT channels 33–40 and 41–48
respectively.
STEREO/MONO MASTER section
2
1
3
4
NAVIGATION KEYS section
If you press and hold a navigation key for two seconds or longer,
that key will blink. At this time, only the object of control for the
Centralogic section will be changed to the corresponding chan-
nels and fixed. If you press a different navigation key while the first
key is blinking, only the object of control in the touch screen will
be changed.
NOTE
1 52
3 4
9 8
76
L
J K