Filter
Top Products
M7CL Owner’s Manual
Setup items required when you start up the M7CL for the first time
52
For example if you want to make head amp settings
for INPUT jack 7, press the [SEL] key of the channel
strip for INPUT channel 7.
[INPUT section channel strip]
1 [SEL] key
B Level meter
When you press the [SEL] key, the key LED will light.
The lit LED indicates that this channel is selected for
operations. The level meter of that channel strip will
indicate the input level for that channel.
3
In the SELECTED CHANNEL section
located at the left of the touch screen, press
any of the encoders.
When you press one of the encoders in the
SELECTED CHANNEL section, the SELECTED
CHANNEL VIEW screen will appear in the touch
screen.
[SELECTED CHANNEL section]
1 [HA] encoder
The SELECTED CHANNEL section provides
focused control of the currently selected channel (i.e.,
the channel whose [SEL] key is lit).
[SELECTED CHANNEL VIEW screen]
1 HA field
The SELECTED CHANNEL VIEW screen shows
most of the parameters of the channel currently
selected by its [SEL] key.
1
3
1
1
• In actuality, you can use the encoders of the SELECTED
CHANNEL section to operate the channel selected by its
[SEL] key even without displaying the SELECTED CHANNEL
VIEW screen. (In this case, a popup window will appear to
show the value of the parameter you’re operating.)
HINT