Filter
Top Products
Using an external head amp
M7CL Owner’s Manual
Graphic EQ and effects
16
193
Here’s how an external head amp (subsequently referred
to as the “external HA”) connected to the REMOTE con-
nector or EtherSound connector can be remotely con-
trolled from the M7CL.
1
Connect the M7CL and external HA.
Refer to “Using an external head amp” (→ p. 190) or
the owner’s manual for your external HA.
2
In the function access area, press the
RACK button to access the VIRTUAL RACK
window.
1 RACK button
B EXTERNAL HA tab / EXT-ES HA tab
3
In the upper part of the VIRTUAL RACK win-
dow, press the EXTERNAL HA tab (EXT-ES
HA tab) to display the EXTERNAL HA field
(EXT-ES HA field.)
The EXTERNAL HA field (EXT-ES HA field)
includes the following items.
1 EXTERNAL HA field / EXT-ES HA field
This field shows the state of the connected external
HA.
B ID / Model name / +48V master
This displays information for the external HA
mounted in the rack. The ID number is automatically
assigned in order of the devices connected to the
REMOTE connector or EtherSound connector, from 1
to six. This area also shows the on/off status of the
master phantom power.
C Virtual racks
These are six racks in which remotely controllable
external HA units can be mounted. If an external HA
is mounted, its settings (GAIN setting, phantom
power, and HPF on/off) are shown. When you press a
rack, the EXTERNAL HA popup window for that rack
will appear.
D EXTERNAL HA PORT SELECT popup
button (M7CL-32/48)
This button accesses the EXTERNAL HA PORT
SELECT popup window, where you can specify the
input ports to which the external HA mounted in the
rack will be connected.
E Field select tabs
Use these tabs to switch the field shown in the VIR-
TUAL RACK window. For details on the GEQ/
EFFECT fields, refer to “Virtual rack operations” (→
p. 172).
F VIEW switch buttons (M7CL-48ES)
Use these buttons to select the virtual rack display for
SB168-ES or for others (AD8HR). If only the SB168-
ES is connected, select the virtual rack display for
SB168-ES.
G STAGE BOX SETUP (M7CL-48ES)
When the SB168-ES is connected, you can turn on or
off the automatic setup of EtherSound input/output
patches and word clock on the M7CL-48ES. You can
also change some settings depending on the connec-
tion type. For more information, please refer to “Con-
necting SB168-ES units to the M7CL-48ES using the
STAGE BOX SETUP function” (→ p. 43).
Remotely controlling
an external head amp
•To set up an external HA, you will use the EXTERNAL HA popup
window on the M7CL-32/48, and the SB168-ES HA and EXT-ES
HA popup windows on the M7CL-48ES. In this section, these
popup windows are collectively referred to as the “EXTERNAL HA
popup window.”
NOTE
2
1
1 5
2 3 4
M7CL-32/48
6
7
M7CL-48ES