Filter
Top Products
M7CL Owner’s Manual
Using dynamics
120
4
To select a key-in signal, proceed as fol-
lows.
1
In the DYNAMICS 1 (2) popup window (1 ch),
press the KEY IN SOURCE button to access
the KEY IN SOURCE SELECT popup window.
2
Select one of the following as the key-in sig-
nal.
• For an input channel
*1 The selectable signals are limited to the group to which that
channel belongs, from the seven groups CH 1–8, CH 9–16,
CH 17–24, CH 25–32, CH 33–40, CH 41–48, and STIN 1L/
1R–4 L/4 R.
• For an output channel
*2 The selectable signals are limited to the group to which that
channel belongs, from the four groups MIX 1–8, MIX 9–16,
MATRIX 1–8, and ST/MONO (C).
3
Press the CLOSE button to close the popup
window.
5
If you want to copy dynamics settings to
another channel, or initialize the dynamics
settings, use the tool buttons of the popup
window.
For details on how to use these buttons, refer to “Using
the tool buttons” (→ p. 35).
SELF PRE EQ
The pre-EQ (attenuator) signal of the cur-
rently selected input channel
SELF POST EQ
The post-EQ signal of the currently
selected input channel
CH 1–48
POST EQ,
STIN 1L/1R–
4L/4R POST EQ
The post-EQ signal of the corresponding
input channel (*1)
MIX OUT 13–16
The post-ON signal of the corresponding
MIX channel
SELF PRE EQ
The pre-EQ (attenuator) signal of the cur-
rently selected output channel
SELF POST EQ
The post-EQ signal of the currently
selected output channel
MIX 1–16
POST EQ,
MTRX 1–8
POST EQ, ST L/R,
MONO (C),
POST EQ
The post-EQ signal of the corresponding
output channel (*2)
MIX OUT 13–16
The post-ON signal of the corresponding
MIX channel
• Dynamics settings can be saved/loaded at any time using the
dedicated library (
→
p. 35). Presets suitable for a variety of
instruments or situations are also provided.
•You can also access the SELECTED CHANNEL VIEW
screen, and use the encoders of the SELECTED CHANNEL
section to edit the dynamics settings (
→
p. 91).
•Even when the DYNAMICS 1 (2) popup window is displayed,
you can use the encoders of the SELECTED CHANNEL sec-
tion to control the dynamics.
HINT