Filter
Top Products
M7CL Owner’s Manual
About the internal effects
180
The M7CL’s internal effects can be mounted in racks 5–8, and patched to an output channel’s
output or input channel’s input, or inserted into a channel. For each effect mounted in a rack, you
can choose one of 54 types of effect. With the default settings, the signals from MIX channels
13–16 are input to racks 5–8, and from the racks are then output to ST IN 1–4 (L/R).
To use an internal effect via send/return, assign the output
of a MIX channel etc. to the input of the effect, and assign
the output of the effect to an input channel.
In this case, the corresponding output channel is used as a
master channel for the effect send, and the input channel is
used as an effect return channel.
Alternatively, you can assign the input and output of the
internal effect to the insert-out/in of a desired channel
(except for a ST IN channel), so that the effect is inserted
into that channel.
The internal effects fall into two categories; “STEREO
type” (2-in/2-out) effects that process the L/R channel
input signals independently, and “MIX type” (1-in/2-out)
effects that mix the two channels before processing them.
If signals are assigned to both the L and R inputs of an
effect, the way in which the L/R channels are processed
will depend on whether a Stereo effect type or a Mix
effect type is selected, as follows.
● STEREO type effects
● MIX type effects
If a signal is assigned to only one input of a two-input
effect, it will be processed as mono-in/stereo-out regard-
less of whether a Stereo effect type or Mix effect type is
selected.
About the internal effects
• The internal effects cannot be mounted in racks 1–4.
• Some effect types can be mounted only in rack 5 or 7.
NOTE
OUTPUT PATCH
INPUT PATCH
EFFECT
EFFECT
EFFECT
EFFECT
Output of
the output
channel
Input of the
input channel
Rack 5
Rack 6
Rack 7
Rack 8
EFFECT
Insert-out of a
desired channel*
Insert-in of a
desired channel*
*Except for a ST IN channel
INPUT L EFFECT L L RETURN
INPUT R EFFECT R R RETURN
INPUT L L RETURN
INPUT R
EFFECT
R RETURN
L RETURN
EFFECT
R RETURN
INPUT
L or R