Filter
Top Products
5 - 70 FUNCTION REFERENCE
STATUS SCREEN
Description:
Normally a maximum of four lines of setting information are given in the lower
screen area. More extensive setting information can also be displayed. The
STATUS toggle key switches between normal and extensive settings information.
The status screen gives the following additional setting readouts:
- Channel input coupling is indicated by AC, DC, or GND instead of symbols.
- Settings of inactive channels are given in addition to the active channels.
- Channel off or on is displayed.
- The probe type is given for each channel.
- A continuous indication of HOLD OFF, LEVEL MAIN TB and LEVEL DEL’D TB
is given.
- MAIN TB and DEL’D TB trigger coupling are indicated.
- The trigger position is displayed.
- TV mode settings are displayed.
When the SAVE or RECALL menu is active, the STATUS SCREEN will show the
X and Y settings of the displayed traces.
Note: The STATUS key has a third function when the oscilloscope is under
remote control. This second function is called ’go to LOCAL’ and is
indicated in small text below the STATUS key. For more information,
refer to the ’REMOTE CONTROL RS-232’ and ’REMOTE CONTROL
IEEE 488.2’ functions.
Key sequence:
Toggle key to select amount of settings information on
screen
STATUS
LOCAL