Filter
Top Products
5 - 90 FUNCTION REFERENCE
UTIL MENU
Description:
The UTIL menu is used to make presettings for instrument settings that do not
need to be changed frequently:
- The operation of the AUTOSET key. For a description, refer to the AUTOSET
and AUTOSET USERPROG functions.
- Selections in relation to probes. Refer to PROBE UTILITIES function for details.
- Amount of information in CRT viewing area and audio signals. Refer to the
UTILITY SCREEN & SOUND function. The UTILITY SCREEN & SOUND
menu has a dedicated submenu for usertext. See the USERTEXT function for
more information.
- Presettings for the remote control interfaces. Refer to REMOTE CONTROL
RS-232 and REMOTE CONTROL IEEE 488.2
- Presetting for suitable printer or plotter and real time clock adjustment.
- Settings for maintenance and repair such as tests and calibration data. Data
affecting the instrument’s accuracy can only be changed by entering a
password. This is explained in detail in the Service Manual.
The UTILITY menu is reached via the UTILITY menu key. The following figure
shows the structure of the UTILITY menu related to instrument operation.
Key sequence:
Access to AUTOSET programming.
Access to PROBE functions.
Access to UTILITY SCREEN & SOUND functions.
(’REMOTE CONTROL’ when IEEE 488 option is present)
Access to interface settings (REMOTE functions).
Access to UTILITY MAINTENANCE functions (for service
technicians only).
Access to PRINT & PLOT & CLOCK settings menu.
UTILITY
AUTOSET
PROBE
SCREEN&
SOUND
RS232
SETUP
MAINTE-
NANCE
...
...
...
...
...
ST6779
9312
PRINT&
PLOT&CLK
...