Filter
Top Products
THE CPL PROTOCOL 6 - 41
RESET INSTRUMENT RI
Purpose:
Resets all of the software of the oscilloscope, including the CPL protocol handler
and all of the input and output buffers.
Oscilloscope settings remain the same. Interface parameters are not changed in
order to keep the communication alive.
When the Reset has been completed the oscilloscope responds with an
<acknowledge>.
There is no
frontpanel equivalent for this command.
Command:
Response:
Note: <acknowledge> will be sent after the Reset has been completed
Example:
100 PRINT #1,"RI" :’Send command
110 GOSUB 1000 :’Sync on acknowledge
"RI" CR
acknowledge CR