Filter
Top Products
3 - 16 GETTING STARTED
3.11 MORE ADVANCED FEATURES
All basic functions are accessed by dedicated keys for fast and easy operation.
Some of the more advanced features are menu operated. Menus are called up by
pressing one of the keys identified with
blue
text on the front panel. After you
press one of these keys, a menu is displayed on the right side of the screen. This
menu gives you access to the more advanced functions of the oscilloscope. Use
the blue softkeys to the right of the screen to select the desired functions; the
selected function is indicated by the highlighted text.
Step 1 Press the key marked
TRIGGER
.
Check that the ’TRIGGER MAINTB’ menu is displayed at the right side
of the screen.
After changing the setting, you can deactivate the menu again to use
the full screen for the signal.
There are two ways to do this:
- Press the
TRIGGER
key once again.
- Press the
TEXT OFF
key.
The TEXT OFF key operates in a 1-2-3 cycle, and allows you to blank
the bottom text line as well.
Step 2 Use both methods to familiarize yourself with turning the menus and
the bottom text line on and off.
TRIGGER
TRIGGER WITH
MENUKEY
1
2
3
4
ST6433
9303
SOFTKEYS
Figure 3.8 Menu keys and softkeys
CH1
200mV
MTB 200µs
CH1
CH1
200mV
MTB 200µs
CH1
TEXT OFF
TEXT OFF
TEXT OFF
ST6679
TRIGGER
MAIN TB
edge tv
logic
ch1
line