1606 CHAPTER 96: MPLS TE CONFIGURATION COMMANDS
mpls rsvp-te
Syntax mpls rsvp-te
undo mpls rsvp-te
View MPLS view, interface view
Parameter None
Description Use the
mpls rsvp-te command to enable RSVP-TE.
Use the
undo mpls rsvp-te command to disable RSVP-TE.
By default, RSVP-TE is disabled.
You must enable RSVP-TE before you can configure other RSVP-TE features.
Before enabling RSVP-TE, enable MPLS in both system view and interface view.
Disabling RSVP-TE in MPLS view disables RSVP-TE on interfaces.
Example # Enable RSVP-TE on current node.
<Sysname> system-view
[Sysname] mpls
[Sysname-mpls] mpls rsvp-te
# Enable RSVP-TE on interface Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] mpls rsvp-te
mpls rsvp-te authentication
Syntax mpls rsvp-te authentication { cipher | plain } auth-key
undo mpls rsvp-te authentication
View Interface view
Parameter cipher: Indicates that the specified authentication key is a cipher-text key.
plain: Indicates that the specified authentication key is a plain-text key.
auth-key: Authentication key, case sensitive. Input in plain text, the string for it is 8
to 16 characters in length; input in cipher text, the string for it is 24 characters in
length. If the plain keyword is specified, it can only be input in plain text. If the
cipher keyword is specified, it can be input in both plain text or in cipher text.
