Filter
Top Products
146
Sounding a beep when the LCD
screen is pressed
If the Global P0: Basic Setup, System Preference page
“Beep Enable” check box is turned on, a beep will sound
when you press an object in the LCD screen.
Uncheck this if you do not want a beep to be sounded.
Using the TRITON STUDIO as a
data filer
MIDI exclusive data transmitted from an external device
can be received by the TRITON STUDIO and saved on a
floppy disk, or other media (the Data Filer function). This
is done using the Disk mode Save page “Save Exclusive”
page menu command (☞PG p.168).
Setting the calendar function
Here’s how to set the date and time for the TRITON Stu-
dio’s internal calendar. The date and time are recorded
when you save data. Use the page menu command “Set
Date/Time” (Disk, Utility page) to make these settings.
You will need make these settings after you purchase
the TRITON Studio, and after you replace the calen-
dar backup battery.
1 Press the [DISK] key to enter Disk mode.
2 Press the Utility tab.
3 Select the page menu command “Set Date/Time.”
The following dialog box will appear.
4 Use the VALUE controllers to set “Year,” “Month,”
“Day,” “Hour,” “Minute,” and “Second” to the correct
year, month, day, hour, minute, and second.
5 Press the OK button.
If the calendar backup battery runs low, a message of
“Battery voltage for calendar IC” will appear in the
LCD screen. If the calendar backup battery runs
down completely, the calendar will be initialized, and
the date and time will not be recorded correctly.
You can replace the calendar backup battery by your-
self. Refer to PG p.286 for details.
Shortcuts
[MENU] key + numeric keys [0]–[9]
• Accesses the pages within a mode
[ENTER] key + numeric keys [0]–[9]
• Accesses the page menu commands in each page (up
to ten items)
[ENTER] key + keyboard
• Inputs note number values or velocity values
• Selects “KEY” in Global P5: Drum Kit, Sequencer P6:
Pattern/RPPR, RPPR Setup page
• Selects base key and index in Sampling mode
[ENTER] key + [LOCATE] key
• In Sequencer mode and Song Play mode, sets the
current location as the “Location” (equivalent to the
“Set Location” page menu command)