Filter
Top Products
102 MIDI
01V96i—Reference Manual
Selecting MIDI Messages for
Transmission and Reception
You can select MIDI messages to be transmitted or received at
a specified port.
To do so, press the DISPLAY ACCESS [MIDI] button, then
press the [F1] button to display the MIDI | Setup page.
Select MIDI channels for transmission and reception in the
CHANNEL row, and turn the transmission and reception of
each MIDI message on or off using the buttons in the param-
eter rows from PROGRAM CHANGE to OTHER COM-
MANDS.
1 CHANNEL
This parameter row enables you to specify MIDI Chan-
nels for MIDI message transmission and reception. The
following parameters are available in this row:
• Tx ..............................This parameter box specifies a MIDI
Transmit Channel.
• Rx..............................This parameter box specifies a MIDI
Receive Channel.
2 PROGRAM CHANGE
This parameter row enables or disables transmission and
reception of Program Changes.
• Tx ON/OFF ............Transmission of Program Change
messages is enabled or disabled.
• Rx ON/OFF............Reception of Program Change mes-
sages is enabled or disabled.
• OMNI ON/OFF.....When this button is turned on, Pro-
gram Changes on all MIDI Channels
are received regardless of the
CHANNEL row settings.
• ECHO ON/OFF.....This button determines whether
Program Change messages received
at the MIDI IN port are echoed
through to the MIDI OUT port.
3 CONTROL CHANGE
This parameter row enables or disables transmission and
reception of Control Changes.
• Tx ON/OFF ............Transmission of Control Change
messages is enabled or disabled.
• Rx ON/OFF............Reception of Control Change mes-
sages is enabled or disabled.
• ECHO ON/OFF.....This button determines whether
Control Change messages received
at the MIDI IN port are echoed
through to the MIDI OUT port.
4 PARAMETER CHANGE
This parameter row enables or disables transmission and
reception of Parameter Changes.
• Tx ON/OFF ............Transmission of Parameter Change
messages is enabled or disabled.
• Rx ON/OFF
............Reception of Parameter Change mes-
sages is enabled or disabled.
• ECHO ON/OFF.....This button determines whether
Parameter Change messages
received at the MIDI IN port are
echoed through to the MIDI OUT
port.
5 BULK
This parameter row enables or disables reception of Bulk
Dump data.
• Rx ON/OFF............Reception of Bulk Dump data is
enabled or disabled.
6 OTHER COMMANDS
• ECHO ON/OFF.....This button determines whether
other MIDI messages received at the
MIDI IN port are echoed through to
the MIDI OUT port.
7 Fader Resolution
This parameter specifies the resolution of the value out-
put when you operate the 01V96i’s faders. To transfer
fader value data between two cascaded 01V96is, or to
record the 01V96i operation to or play it back from a
sequencer, select the HIGH button. When the LOW but-
ton is selected, the fader resolution switches to 256 steps.
1
2
3
4
5
6
7