Filter
Top Products
76 Libraries
01V96i—Reference Manual
Output Patch Library
The Output Patch library enables you to store and recall all
Output Patch settings. The library contains one preset mem-
ory and 32 user (readable & writable) memories.
To access the Output Patch library, press the DISPLAY
ACCESS [PATCH] button repeatedly until the Patch | Out
LIB page appears.
For details on storing and recalling memories, see “General
Library Operation” on page 74.
The Output Patch preset memory #0 contains the following
settings:
Effects Library
The Effects library enables you to store and recall Effects pro-
cessor 1–4 programs. The library contains 56 preset programs
(including Add-On Effects) and 72 user (readable & writable)
programs.
To store and recall settings to and from the library, you must
locate the corresponding Effects processor’s page.
To access the Effects library, press the DISPLAY ACCESS
[EFFECT] button repeatedly until the library page for the
desired Effects processor appears.
Each Effects processor features the library pages listed below:
• Internal Effects Processor 1 Library ...FX1 Lib page
• Internal Effects Processor 2 Library ...FX2 Lib page
• Internal Effects Processor 3 Library ...FX3 Lib page
• Internal Effects Processor 4 Library ...FX4 Lib page
1 EFFECT NAME
This parameter displays the name of the Effects program
currently selected by the Effects processor.
2 TYPE
This parameter displays the effects type currently used by
the Effects processor. The number of input and output
channels for the currently-used effects appears below the
TYPE parameter.
3
Move the cursor to this button, then press [ENTER] to
display the Effect | FX1 Edit, FX2 Edit, FX3 Edit, or FX4
Edit page to adjust the Effects parameters.
4
Move the cursor to this button, then press [ENTER] to
display the In Patch | Effect page to assign the input and
output signals of Effects processors 1–4.
5 Level meters
These meters indicate the input or output levels of the
currently-selected Effects processor. Select the IN button
or OUT button to display the input levels or output levels
respectively.
Slot output channels 1–8 Bus Outs 1–8
Slot output channels 9–16 Bus Outs 1–8
ADAT OUT channels 1–8 Bus Outs 1–8
OMNI OUT connectors 1–4 Aux Outs 1–4
Note: The Effects library is shared by Effects processors 1–4. How-
ever, only Effects processors 1 and 2 enable the recall of Effect 19
“HQ Pitch” and Effect 42 “Freeze.”
1243 5