Filter
Top Products
Machine Control Function 99
01V96i—Reference Manual
Remote Control
3 TRANSPORT section
This section enables you to control the transport func-
tions on external machines.
• REW......................... This button starts rewind on external
machines.
• FF.............................. This button starts fast forward on
external machines.
• STOP........................ This button stops external machines.
• PLAY........................ This button starts playback on exter-
nal machines.
• REC.......................... This button is used in conjunction
with the PLAY button to start
recording on external machines.
4 FRAMES
This parameter selects the timecode frame rate from 24,
25, 30D (drop frame), and 30.
6. To control the transport functions, move the
cursor to the desired button in the TRANS-
PORT section, then press [ENTER].
7. If you desire, move the cursor to the buttons
and parameters in the LOCATE/TIME section
and the TRACK ARMING section, then press
the [ENTER] button or rotate the Parameter
wheel to control the transport functions on
external machines.
Tip: You can also use the programmed User Defined buttons
to control Machine Control functions. For more information
on assigning functions to the user defined keys, refer to “Using
the User Defined Keys” in the Owner’s Manual (separate
booklet).