Filter
Top Products
Linking EQ and Compressor Parameters 63
01V96i—Reference Manual
Grouping Channels & Linking Parameters
•In Comp page
This page enables you to set Compressor links (i–l) for
Input Channels 1–32.
•Out Comp page
This page enables you to set Compressor links (m–p) for
Bus Outs (1–8), Aux Outs (1–8) and Stereo Out.
2. Press the up ( ) or down ( ) cursor button
to select a link to which you want to add chan-
nels.
3. Press the [SEL] button for a channel you wish
to add to the EQ or Compressor link.
The selected channel is marked with “ ” and the chan-
nel is added to the link.
4. In the same way, press the [SEL] button for
other channels you wish to add to the link.
The EQ or compressor settings for the first channel added
to the link are applied to all subsequently-added chan-
nels.
5. After all desired channels are added to the
link, edit the EQ or compressor parameters
for one of the linked channels.
The edits for the EQ or compressor parameters are
applied to the rest of the linked channels.
Tip:
• If you add one channel from a pair to a link, the pair part-
ner is automatically added to the link.
• You can also select a channel on another layer by switching
layers.
Example: Input Channels 1–4, 7, 8, 12 and 14
have been added to EQ link b.