Filter
Top Products
Effects Parameters 145
Appendix: Parameter Lists
01V96i—Reference Manual
Dual Phaser
This is a 2-in/2-out phaser that emulates a vintage
phaser manufactured during the mid-1970s.
Parameter Range Description
RATE 1
SYNC,
0.067–20.000 Hz
Adjusts the modulation rate of
LFO1
SHAPE 1 Sine, Square Selects the waveform of LFO1
RATE 2
SYNC,
0.111–20.000 Hz
Adjusts the modulation rate of
LFO2
SHAPE 2 Sine, Square Selects the waveform of LFO2
DEPTH
(A/B)
1.00–10.00 Adjusts the depth of modulation
FB (A/B) 0.00–10.00 Adjusts the amount of feedback
SW (A/B) ON, OFF
Switches the phaser circuit
on/off
SWEEP B LFO1, LFO2 Selects the LFO for Phaser B
SYNC B NORM, REV
Selects the LFO phase for Phaser
B
IN MODE 1, 2, 3, 4
Specifies the way in which the
two phasers are connected.
1: After mixing the stereo input,
the sound processed by Phaser A
is output from the left channel,
and the sound processed by
Phaser B is output from the right
channel.
2: After mixing the stereo input,
the sound processed by Phaser A
is output from the left channel,
and the sound processed by
Phaser A and then additionally
processed by Phaser B is output
from the right channel.
3: After mixing the stereo input,
the sound processed by Phaser A
and then additionally processed
by Phaser B is output from both
the left and right channels.
4: The left input channel is pro-
cessed by Phaser A and output
from the left channel, and the
right input channel is processed
by Phaser B and output from the
right channel.