Open as PDF
2 – Quick Start Guides
If an OL indicator continues to light even when the LEVEL knob is turned
down, the mic signal itself is too loud. In this case, if the input source
, change it to
). If the OL indicator continues to light even when
, move the sound source away from the mic or
lower the volume at the sound source.
When an internal mic is an input source if the REC indicator is unlit for the
track with that mic as its recording source, you will not be able to hear that
Always monitor through headphones when using a mic. If you monitor
through speakers, feedback could occur.
Using internal mics to record rhythm guitar to
1. Press the Play (7) button while pressing and holding the Record (0)
button to start recording and play the rhythm guitar part.
The Record (0) indicator lights, and the TRACK 3 REC indicator stops
blinking and stays lit.
TRACK 3 REC indicator
2. When you are done playing, press the Stop (8) button to stop recording.
3. Press the TRACK 3 REC button to end recording standby. The REC
indicator becomes unlit.