Filter
Top Products
30
TASCAM DP-006
3 – Names and functions of parts
0 ASSIGN button
Use this to assign (set) the TRACK inputs (INPUT A/B). Press this button to
open the
INPUT ASSIGN
screen on the display. Signals from assigned
inputs become the recording sources. (See “Assigning inputs” on page
54.)
q PAN knobs (TRACK 1–TRACK 4)
TRACK 1 and TRACK 2
Use to adjust the stereo position of the track playback signal. (See “Stereo
position (panning)” on page 72.)
TRACK 3 and TRACK 4
If the track is stereo, use to adjust the left-right balance.
If the track is mono, use to adjust the stereo position of the track
playback signal in the same way as for TRACK 1 and TRACK 2. (See
“Stereo position (panning)” on page 72.)
w LEVEL knob (TRACK 1–TRACK 4)
Use to adjust the level of the track. (See “Level and balance” on page 72.)
e REC buttons/indicators (TRACK 1–TRACK 4)
Use to turn the track record function ON (arm for recording) and OFF. To
monitor the input signals of the internal mics using headphones or an
external monitoring system (powered monitor speakers or an amplifier
and speakers), press the corresponding TRACK REC button. When a REC
button is ON, its REC indicator blinks when the recorder is stopped, and
lights when it is recording.
r Function buttons
The functions of these buttons depend on the current screen. The
functions currently assigned to these buttons are shown at the bottom of
the display screen.
NOTE
In this manual, the four function buttons are referred to as F1, F2, F3 and
F4 in order from the left.
t MENU button
Press to open the
MENU
screen. (See “Menu structure” on page 36.)
y HOME button
Press to open the the Home Screen. (See “Home Screen” on page 34.)
When the unit is stopped and the Home Screen is open, use this button
to move the cursor between time counter divisions. (See “Direct locate
function” on page 64.)
u DATA wheel
Use this to select items and change values on the setting screens.. When
the unit is stopped and the Home Screen is open, turn to change the
record/playback position. (See “Direct locate function” on page 64.)
i m [RTZ] button
Press when stopped or playing back to search backward. Press it again to
change the speed from 10x to 50x, again for 100x and 1000x.
Press while pressing and holding the Stop (8) button to locate to the
beginning of the song (00:00:00:00) using the Return To Zero function
(RTZ). (See “Returning to the song beginning (RTZ function) or the point
where recording was last started (LRP function)” on page 64.)
o Stop (8) button
Press to stop playback, recording and searching backward/forward. Press
together with the m [RTZ] button or the , [LRP] button to locate
to the beginning of the song (00h00m00s00f) or the last recording point
(LRP). (See “Returning to the song beginning (RTZ function) or the point
where recording was last started (LRP function)” on page 64.)
p , [LRP] button
Press when stopped or playing back to search forward. Press it again to
change the speed from 10x to 50x, again for 100x and 1000x.
Press while pressing and holding the Stop (8) button to locate to the
point when recording last started using the Last Recording Position (LRP)
function. (See “Returning to the song beginning (RTZ function) or the
point where recording was last started (LRP function)” on page 64.)
a Play (7) button
Press this button to start playback. While pressing the Record (0)
button, press this button to start recording. Press this button again when
recording to stop recording and start playback (punch out).