Filter
Top Products
70
TASCAM DP-006
8 – Editing Tracks
CLEAN OUT (track erase)
This completely erases the selected track. This erases the entire track, so the IN
and OUT points have no effect.
The parameters that can be set are as follows.
• CLEAN OUT TRK (1, 2, 3, 4, 1/2, 3/4, 1-4)
SILENCE (part erase)
This erases the selected track between the IN and OUT points. This has the
same effect as recording a silent signal between the IN and OUT points. This
operation does not change the track length.
The parameters that can be set are as follows.
• SILENCE TRK (1, 2, 3, 4, 1/2, 3/4, 1-4)
TIP
This function can be used to remove short noises, for example.