Open as PDF
3 – Names and functions of parts
When a battery is being used, a battery icon shows the amount of power
remaining in bars ( , , ).
When the batteries are almost dead and the power will soon turn off, an
icon with no bars appears blinking.
When using the AC adapter (sold separately) appears.
5 Recorder transport state
One of the following icons appears depending on the status of the
6 Repeat playback mode indicator
When repeat playback is active appears.
7 Level meter guide
This guideline for adjusting input and output levels indicates –12 dB.
8 Recorder time counter
Shows the elapsed time from the start of the song.
9 Cursor that shows time increment being edited
When the unit is stopped press the HOME button to move the cursor
between time counter divisions.
Turn the DATA wheel to change the value of the underlined time
0 Shows the F1 button function
When that Home Screen is open, press the F1 [TUNER] button to open the
q INPUT A and B Level meters
These show this input source signal levels of INPUT A ( ) and INPUT B ( ).
w TRACK 1-4 level meters
Shows the input level when recording and the playback signal level when
Depending on the track type setting, the size of the level meter icons and
width of the level meters for TRACK 3 ( ) and TRACK 4 ( ) changes.
Track type Level meter icons
e Level meter for stereo outputs (L, R)
Shows the output signal level from the /LINE OUT connector.