Filter
Top Products
TASCAM DP-006
21
2 – Quick Start Guides
Setting the guitar as an input source
1. Press the INPUT SETTING button to open the
INPUT SETTING
screen.
2. In order to use the guitar/line input to record guitar to TRACK 2, use the
DATA wheel to set the input source for
IN A
(INPUT A) to
GUITAR/
LINE
,
GUITAR/LINE M
or
GUITAR/LINE H
.
3. Press the HOME button to reopen the Home Screen.
NOTE
GUITAR/LINE
,
GUITAR/LINE M
and
GUITAR/LINE H
settings
change the input gain. Set according to the level of the input.
If you are not sure which setting to use, choose
GUITAR/LINE
. If the
input level is still too low after adjusting it, return to
INPUT SETTING
screen and change the setting to
GUITAR/LINE M
.
If the input level is still not high enough, change the setting to
GUITAR/
LINE H
.
Recording lead guitar to TRACK 2
Now, you will record lead guitar on TRACK 2 while listening to the rhythm
guitar on TRACK 3.
Follow these steps to change the recording source for TRACK 2.
1. When the recorder is stopped, press the ASSIGN button to open the
INPUT ASSIGN
screen.