Open as PDF
2 – Quick Start Guides
9. Press the F4 [EXEC] button.
pop-up message appears, the unit enters master
recording mode and the Home Screen reopens.
When in master recording mode,
appears highlighted at
the top left of the Home Screen.
10. Press the Play (7) button while pressing and holding the Record (0)
button to start recording the stereo master track from the IN point.
Recording automatically stops when the OUT point is reached.
Set the IN and OUT points at least four seconds apart. If they are less than
four seconds apart, a
Trk Too Short
pop-up message will appear
and you will not be able to change the unit to master recording mode.
You can use the LEVEL knobs to adjust the track and overall levels as you
record the master track.
Checking the stereo master track
You can play back the stereo master track that you created to check it.
1. When the recorder is stopped, press the REC MODE button to open the
2. Use the DATA wheel to select (highlight)