TASCAM DP-006
29
3 – Names and functions of parts
Top Panel
1 button / indicator
Press and hold this button to turn the unit ON and OFF. (See “Start-up &
shutdown” on page 41.)
The indicator lights when the power is on.
2 INPUT A/B LEVEL knobs and OL indicators
Use the LEVEL knobs to adjust the input levels for INPUT A/B. (See “Making
the first recording” on page 56.)
If an input source level is too high its OL (overload) indicator lights. If a
LEVEL knob is set too high (higher than 2–3 o’clock), the OL indicator
could light even if the volume of the input source signal is suitable.
3 REPEAT button
Turns the repeat playback mode ON and OFF. (See “Repeat playback” on
page 65.)
4 IN/OUT button
Press this button to open the
I/O SETTING
screen, and to set IN
(starting) and OUT (ending) points for repeat playback and track editing.
(See “Setting IN and OUT points” on page 65.)
The IN and OUT points are also used as the starting and ending points
when creating stereo master tracks.
5 REC MODE button
Press this button to open the
RECORDER MODE
screen where you can
set the recorder mode. (See “Recorder modes” on page 42.)
6 UN/REDO button / indicator
Press this button to undo the previous action or to redo the last undone
action. (See “Undoing operations (undo)” on page 58.)
Press this button while pressing and holding the Stop (8) button to open
the
HISTORY
screen. Using this screen, you can undo multiple opera-
tions at once.
This indicator lights when one or more operations that have been undone
can still be redone.
7 MASTER LEVEL knob
This adjusts the stereo signal level output from the /LINE OUT jack
This knob also adjusts the recording level when bouncing tracks, mixing
down and mastering.
8 Display
This shows various information.
9 INPUT SETTING button
Press this button to open the
INPUT SETTING
screen where you can
set input sources. (See “Selecting the input source” on page 51.)