Filter
Top Products
TASCAM GigaEditor 4 Manual 145
Force to mono (stereo)
Forces the region to be either mono or stereo. Since mono and stereo samples cannot be mixed within a
region, if any incompatible samples are currently mapped to the region, they will be unmapped.
Delete split
Deletes the selected split.
Tall velocity window
Toggles the velocity window between its normal position and a special “tall” conguration that is useful
with large numbers of velocity splits.
Additional Dimension Windows
As we’ve seen, the large dimension window to the le of the others is dedicated to velocity. Additional
dimensions can be created in any of the smaller horizontal dimension windows. Eight of these windows are
available, but you can select a display mode that hides some of the windows if you don’t need them all.
Click the Dimension View button
near the bottom of the Editor window to cycle through the
available modes.
The Dimension Controller dialog again
To activate, deactivate, or modify a dimension, click the
header bar at the top of a dimension window.
is brings up the Dimension Controller dialog, which we’ve seen previously in the section on the Velocity
Window. Here we’ll just note that a long list of controllers other than velocity is available. Apart from that,
the dialog works just as it does when launched from the Velocity Window.