Filter
Top Products
166 TASCAM GigaEditor 4 Manual
Because editing individual crossfade points is tedious and must usually be coordinated with the crossfades
in adjacent layers, a graphical Crossfade Editor is provided. You can launch the Crossfade Editor (pictured
below) by clicking the “...” button that appears in the parameter value box when any of the crossfade
parameters is highlighted.
Channel offset
is setting determines which DSP mixer channel the sample will be routed to when the instrument is
loaded in GigaStudio.
For example, when an instrument is assigned to inputs 1-2 in the mixer:
• Samples with an oset of 0 (the default) will be routed to channels 1-2
• Samples with an oset of 2 will be routed to channels 3-4
• Samples with an oset of 3 will be routed to channels 4-5
• Samples with an oset of 4 will be routed to channels 5-6
• Etc.
Sample start offset
e sample oset is used to start playback at a point aer the beginning of the sample. e value is
measured in samples and has maximum of 2000.
is is useful to soen the attack of a sample or if there is a pop at the beginning of a sample.
e Sample Start Oset is also viewable and adjustable in the Waveform View (the blue marker):