Filter
Top Products
152 TASCAM GigaEditor 4 Manual
Decay 2 Time (sec)
e Decay 2 Time is measured in seconds (0.000-60.000) or is set to “Innite” which overrides the time
setting.
is parameter determines how long the Sustain section of the envelope will last. A Decay 2 Time will
cause the sample level to sustain for that amount of time and then go into the release, even without letting
go of the note. Checking the “Innite” check box will cause the sample level to sustain indenitely until
you release the note.
Release time (sec)
e Release Time is measured in seconds (0.000-60.000).
is parameter determines how long it will take for the sample volume to ramp down depending on how
Decay 2 is set.
If the Decay 2 is set to “Innite”, the release will kick in when the note is released.
If the Decay 2 is set to a specic amount of time, then the release will kick in aer that amount of time or
when you release the note, whichever comes rst.
Envelope Modulation Settings
e Modulation settings allow real-time MIDI control of the Attack, Decay and Release of the Amplitude
and Filter Envelopes.
Modulation source
Choose the MIDI controller to use from the list of standard MIDI controllers.
Modulation invert
Reverses the action of the MIDI controller when set to “Yes”.
Attack/Decay/Release modulation depth
e response of these individual parameters is set here.