Filter
Top Products
TASCAM GigaEditor 4 Manual 157
Cutoff frequency
is sets the maximum lter cuto frequency. e range is 0-127.
is parameter is only available if the Cuto Controller is set to “None”.
Cutoff controller
Instead of setting a xed cuto frequency, this parameter allows you to assign a MIDI controller to the
Cuto Frequency for real-time continuous control. is overrides the Cuto Frequency setting, which will
be disabled once you assign a MIDI controller here.
Control invert
When set to “Yes”, inverts the response of the Cuto controller.
Minimum cutoff
Places a limit on the lowest lter cuto frequency when using MIDI cuto controller. e low range of the
MIDI controller will start with this value.
Range is 0-127.