Filter
Top Products
TASCAM GigaEditor 4 Manual 159
e range is 0-127, with a default value of 60 (middle C).
Velocity scale
is value is used to scale the currently selected velocity curve in order to specify a much larger number of
lter velocity responses. For example, if you want the lter to scale from a low cuto to fully open within
the lowest velocity range, the lter response can be scaled to open more quickly by entering values above 20
(up to 127). Values below 20 will cause the lter to open more slowly over velocity yielding a darker
response. e range is 0-127 with a default value of 20. is parameter is only available when the Cuto
Controller is set to “None”.
Filter velocity response curve
Denes how the lter responds to note-on velocity.
• 0 - Non linear
• 1 - Linear
• 2 - Special
ese settings work in conjunction with the Velocity dynamic range parameter (see the next item).
Filter velocity response dynamic range
With this setting, you can lower or raise the dynamic range of the velocity response of
the lter. ere are ve response positions:
• 1 - High
• 2 - Medium high
• 3 - Medium
• 4 - Medium low
• 5 - Low
is setting works in conjunction with the Velocity curve parameter (above) as shown in the following
diagrams: