Roland XV-88 Electronic Keyboard User Manual


 
160
Chapter 7. Adding Effects
For Type: SRV ROOM/SRV HALL/SRV PLATE
Pre Delay (Pre Delay Time)
This specifies the time between when the direct sound is
heard and the moment at which the reverb is first heard.
Time (Reverb Time)
This sets the reverb length.
Size
This adjusts the size of the simulated room or hall. The size
becomes bigger as the value increases.
High Cut (High Cut Frequency)
This sets the frequency above which the high-frequency
content of the reverb will be reduced. If you do not want to
reduce the brightness of the reverb, set this parameter to
BYPASS.
Diffusion (Reverb Diffusion)
This adjusts the change in the density of the reverb over time.
The higher the value, the more the density increases with
time. The effect of this setting is most pronounced with long
reverb times.
Density (Reverb Density)
This adjusts the density of reverb. Higher values result in
greater density.
LF Damp (LF Damp Frequency)
This specifies the frequency below which the low-frequency
content of the reverb sound will be reduced, or damped.
LF Gain (LF Damp Gain)
This adjusts the amount of damping applied to the frequency
range selected with LF Damp. With a setting of 0, there will
be no reduction of the reverbs low-frequency content.
HF Damp (HF Damp Frequency)
This specifies the frequency above which the high-frequency
content of the reverb sound will be reduced, or damped.
HF Gain (HF Damp Gain)
This adjusts the amount of damping applied to the frequency
range selected with HF Damp. With a setting of 0, there will
be no reduction of the reverbs high-frequency content.
REV OUT (REV Output)
fig.07-19
Output Assign (Reverb Output Assign)
Specifies how the sound routed through Reverb will be
output.
A: Output to the OUTPUT A (MIX) jacks in stereo.
B: Output to the OUTPUT B jacks in stereo.
If the Mix/Parallel parameter (SYSTEM/SETUP/
SYSTEM SETUP) is set to MIX, all sounds are output
from the OUTPUT A (MIX) jacks in stereo (p. 169).
Level (Reverb Level)
Adjusts the volume of the sound that has passed through
Reverb.