Filter
Top Products
250
Parameter List
System Parameters
SETUP Group (p. 168)
Display Parameter Value
SYSTEM SETUP LCD LCD contrast 1–10
Power Up Mode Power up mode LAST-SET, DEFAULT
Master Level Master level 0–127
Clock Source System clock source INT, MIDI
System Tempo System tempo 20–250
Mix/Parallel Mix/Parallel MIX, PARALLEL
Patch Remain Patch remain switch OFF, ON
MIDI Group (p. 169)
Display Parameter Value
PERFORM MIDI Control Channel Performance control channel 1–16, OFF
Local Local switch OFF, ON
Remote Remote keyboard switch OFF, ON
PATCH MIDI Rx Ch Patch/Rhythm set receive channel 1–16
Tx Ch Patch/Rhythm set transmit channel 1–16, Rx Ch, OFF
Local Local switch OFF, ON
Remote Remote keyboard switch OFF, ON
GM MIDI Local Switch Local switch OFF, ON
Remote Remote keyboard switch OFF, ON
RECEIVE MIDI Program Change Receive program change switch OFF, ON
Bank Select Receive bank select switch OFF, ON
TRANSMIT MIDI Program Transmit program change switch OFF, ON
Bank Sel Transmit bank select switch OFF, ON
Active Sensing Transmit active sensing switch OFF, ON
SYSTEM MIDI Rx GM On Receive general MIDI system on switch OFF, ON
Rx GM2 On Receive general MIDI 2 system on switch OFF, ON
Rx GS Reset Receive GS reset switch OFF, ON
Device ID Device ID number 17–32
Rx Sys.Excl Receive system exclusive switch OFF, ON
Tx Edit Transmit edit data switch OFF, ON
CONTROL Group (p. 171)
Display Parameter Value
KEYBOARD Transpose Transpose switch OFF, ON
Transpose value -5 (G)– +6 (F#)
Sens Keyboard sensitivity LIGHT, MEDIUM, HEAVY, FULL
Vel Keyboard velocity REAL, 1–127
Aft Aftertouch sensitivity 0–100
HOLD PEDAL Continuous Continuous switch OFF, ON
Output Pedal output OFF, INT, MIDI, BOTH
Polarity Pedal polarity STANDARD, REVERSE
CONTROL PEDAL 1 Assign Pedal 1 assign (*1)
Output Pedal 1 output OFF, INT, MIDI, BOTH
Polarity Pedal 1 polarity STANDARD, REVERSE
CONTROL PEDAL 2 Assign Pedal 2 assign (*1)
Output Pedal 2 output OFF, INT, MIDI, BOTH
Polarity Pedal 2 polarity STANDARD, REVERSE
C1 ASSIGN Assign C1 slider assign (*2)
Output C1 slider output OFF, INT, MIDI, BOTH
C2 ASSIGN Assign C2 slider assign (*2)
Output C2 slider output OFF, INT, MIDI, BOTH
C3 ASSIGN Assign C3 slider assign (*2)
Output C3 slider output OFF, INT, MIDI, BOTH
C4 ASSIGN Assign C4 slider assign (*2)
Output C4 slider output OFF, INT, MIDI, BOTH
SYS CTRL ASSIGN 1 Control 1, 2 System control assign 1, 2 (*2)
SYS CTRL ASSIGN 2 Control 3, 4 System control assign 3, 4 (*2)
*1: OFF, CC01–95 (except 32), PITCH BEND, AFTERTOUCH, OCT UP, OCT DOWN, START/STOP, TAP TEMPO, PROG UP, PROG DOWN
*2: OFF, CC01–95 (except 32), PITCH BEND, AFTERTOUCH