Filter
Top Products
165
Chapter 8. Saving Sounds
Chapter 8
2. Press [UNDO/COMPARE].
The PATCH COMPARE page appears, making it
possible to sound the save destination Patch.
fig.08-03.e
3. Play the keyboard to sound the save destination Patch,
then check whether you really want to overwrite it.
The Patch auditioned using the Compare function may
sound slightly different than when it is played normally.
4. If you want to change the save destination, use the
VALUE dial, [INC/+]/[DEC/-] or numeric keys to
specify the save destination Patch number.
5. Press [UNDO/COMPARE] once again to return to the
PATCH WRITE page.
6. Press [ENTER] to execute the save operation.
Registering Favorite Patches/
Rhythm Sets in the Favorite List
You can keep the Patches and Rhythm Sets that you like to
use all in one place by registering them on the Favorite List.
This list allows you immediate access to your favorite
Patches and Rhythm Sets, whether they are stored internally,
on Wave Expansion Boards, or on memory cards. Up to a
total of 64 Patches and Rhythm Sets can be registered on the
Favorite List.
1. Make sure that the Patch or Rhythm Set you wish to
register is selected.
2. Hold down [SHIFT] and press [PATCH FINDER].
The FAVORITE LIST page will appear.
fig.08-04
3. Use the VALUE dial, [INC/+]/[DEC/-] or numeric keys
and specify the save-destination number.
No data is registered at the factory settings.
• By holding down [SHIFT] and pressing [UNDO/
COMPARE], you can cancel the registration of the Patch
and Rhythm Set that is registered to the currently
specified number.
• You can press or to search for a registered
number.
• By holding down [SHIFT] and pressing or ,
you can find the empty number to which no data is
registered. If no empty number can be found, “Favorite
List Full” appears in the display.
4. Continue holding down [SHIFT], and the following
display will appear.
fig.08-05
5. Hold down [SHIFT] and press [ENTER] to execute the
registration.
Writing destination
Registering Data Without Displaying the
Favorite List
You can register data to the Favorite List directly from
the PATCH PLAY and RHYTHM PLAY pages. This
makes it simple to register data, without having to bring
up the FAVORITE LIST page or specify a destination
number for the registration.
1. Make sure that the Patch or Rhythm Set you wish to
save is selected.
2. Continue holding down [SHIFT], and the following
display will appear.
fig.08-06
3. Hold down [SHIFT] and press [ENTER] to execute
the registration and the display will briefly indicate
“COMPLETED.”
Here, the data is registered to the lowest of the
empty numbers to which no data is registered.
If there is no empty number to which data can be
registered, “Favorite List Full” appears in the
display, and the data cannot be registered.